5. On the stapler/stacker PCB (callout 1), disconnect all the connectors (callout 2) and remove two
screws (callout 3).
1
3
2
2
2
Figure 5-218 Remove the stapler/stacker driver PCB
CAUTION The stapler/stacker PCB is easily damaged by electrostatic discharge. Before
handling the stapler/stacker PCB, always wear an ESD grounding device or discharge
yourself by touching the metal frame of the MFP.
ENWW Stapler/stacker components 349
manuals4you.commanuals4you.com
To Next Page
Loading...