Task Details
date, time, location, and fax-header information. See
details in the HP LaserJet Analog Fax Accessory 300
User Guide.
Print the Configuration page to verify that the MFP is
able to print.
From the Home screen, touch Administration,
Information, Configuration Page,Configuration Page,
and Print.
Verify that each of the following items is listed on the
Configuration page:
●
The LDAP Gateway Address
●
The SMTP Gateway Address
●
All optional devices
●
If a fax accessory is installed, the Modem Status
should indicate “Operational/Enabled.”
●
On the embedded Jetdirect page, make sure that
the IP address is valid and that the Status indicates
“I/O Card Ready.”
Make a copy by using the scanner glass to verify that
the scanner is working.
Make a copy by using the ADF to verify that it is working.
If a fax accessory is installed, send a test fax to verify
that it is set up correctly.
Digitally send a document by using the e-mail feature.
Send a print job to the MFP from a computer to verify
that the printer driver software is installed correctly.
Make sure that all users are aware of the user-training
CD that came with the MFP.
Table 2-1 Installation checklist (continued)
ENWW Installation checklist 25
manuals4you.commanuals4you.com
To Next Page
Loading...