Menu item Sub-menu item Sub-menu item Values Description
Dialing Prefix Off (default)
Custom
Use this feature to specify a prefix number
that must be dialed when sending faxes
from the device.
Billing Codes Off (default)
Custom
When billing codes are enabled, a prompt
appears that asks the user to enter the
billing code for an outgoing fax.
Minimum Length The range is between 1 and 16 digits. The default is 1 digit.
Fax Receive Settings Rings To Answer
The range varies by
location. The factory
default is 2 rings.
Use this feature to specify the number of
rings that must occur before the fax modem
answers.
Ring Interval Default (default)
Custom
Use this feature to control the time between
rings for incoming faxes.
Ringer Volume Off
Low (default)
High
Set the volume for the fax ring-tone.
Blocked Fax
Numbers
Add Blocked
Numbers
Type the fax
number to add.
Use this feature to add or delete numbers
from the blocked fax list. The blocked fax
list can contain up to 30 numbers. When
the device receives a call from one of the
blocked fax numbers, it deletes the
incoming fax. It also logs the blocked fax in
the activity log along with job-accounting
information.
Remove Blocked
Numbers
Select a fax number
to remove.
Clear All Blocked
Numbers
No (default)
Yes
Table 3-11 Fax Setup menu (continued)
70 Chapter 3 Manage and maintain the device ENWW
To Next Page
Loading...