321
NQA client template (DNS), 116
NQA client template (FTP), 122
NQA client template (HTTP), 120
NQA client template (HTTPS), 121
NQA client template (ICMP), 115
NQA client template (SSL), 123
NQA client template (TCP half open), 118
NQA client template (TCP), 117
NQA client template (UDP), 119
NQA client template configuration, 114
NQA client template optional parameters, 124
NQA template configuration (DNS), 150
NQA template configuration (FTP), 154
NQA template configuration (HTTP), 153
NQA template configuration (HTTPS), 153
NQA template configuration (ICMP), 149
NQA template configuration (SSL), 155
NQA template configuration (TCP half open),
151
NQA template configuration (TCP), 150
NQA template configuration (UDP), 152
terminating
NMM NETCONF session, 276
testing
ping network connectivity test, 1
threshold
NQA client threshold monitoring, 92, 110
NQA operation reaction entry, 111
NQA operation support accumulate type, 110
NQA operation support average type, 110
NQA operation support consecutive type, 110
NQA operation triggered action none, 110
NQA operation triggered action trap-only, 110
NQA operation triggered action trigger-only,
110
time
NTP configuration, 7, 12, 26
NTP local clock as reference source, 25
SNTP configuration, 46, 46, 48
timeout
NETCONF session idle timeout time, 248
timer
CWMP ACS close-wait timer, 212
traceroute. See tracert
tracert
IP address retrieval,
3
node failure detection, 3, 4, 4
NQA client operation (UDP tracert), 104
NQA operation configuration (UDP tracert),
140
system maintenance, 1
tracing
information center trace log file max size, 60
Track
NQA client+Track collaboration, 110
NQA collaboration, 92
NQA collaboration configuration, 146
traffic
NQA client operation (voice), 105
RMON configuration, 82, 86
sFlow agent+collector information configuration,
184
sFlow configuration, 183, 183, 186
sFlow counter sampling configuration, 185
sFlow flow sampling configuration, 184
trapping
SNMP notification, 74
triggering
NQA operation threshold triggered action none,
110
NQA operation threshold triggered action
trap-only, 110
NQA operation threshold triggered action
trigger-only, 110
troubleshooting
PI critical priority failure, 231
PoE, 231
PoE profile failure, 232
sFlow, 187
sFlow remote collector cannot receive packets,
187
U
UDP
IPv6 NTP client/server association mode, 27
IPv6 NTP symmetric active/passive association
mode, 30
NMM IPv6 NTP multicast association mode, 35
NMM NTP broadcast association mode, 31
NMM NTP broadcast mode with authentication,
40
NMM NTP client/server mode with MPLS VPN
time synchronization, 42
NMM NTP multicast association mode, 33
NMM NTP symmetric active/passive mode with
MPLS VPN time synchronization, 44
NQA client operation (UDP echo), 103
NQA client operation (UDP jitter), 100
NQA client operation (UDP tracert), 104
NQA client template, 119
NQA operation configuration (UDP echo), 139
NQA operation configuration (UDP jitter), 134
NQA operation configuration (UDP tracert), 140
To Next Page
Loading...
Need help?
General