HPE FlexNetwork 5510 HI Series User Manual

222
Step
Command
Remarks
vpn-instance-name
3. Create an EBGP peer group.
group
group-name
external
By default, no EBGP peer groups
exist.
4. Add a peer into the EBGP
peer group.
peer
ipv6-address [ prefix-length ]
group
group-name
as-number
as-number
By default, no peers exist in the
peer group.
5. (Optional.) Configure a
description for the peer
group.
peer
group-name
description
text
By default, no description is
configured for the peer group.
6. Create the BGP IPv6 unicast
address family or BGP-VPN
IPv6 unicast address family
and enter its view.
address-family ipv6
[
unicast
]
By default, no BGP IPv6 unicast
address family or BGP-VPN IPv6
unicast address family exists.
7. Enable the router to
exchange IPv6 unicast
routing information with
peers in the specified peer
group.
peer
group-name
enable
By default, the router cannot
exchange IPv6 unicast routing
information with the peers.
To configure an EBGP peer group by using Method 3 (IPv4 multicast address family):
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP instance view.
bgp
as-number [
instance
instance-name ]
N/A
3. Create an EBGP peer group.
group
group-name
external
By default, no EBGP peer groups
exist.
4. Add an IPv4 BGP peer into
the EBGP peer group.
peer
ipv4-address [ mask-length ]
group
group-name
as-number
as-number
By default, no peers exist in the
peer group.
5. (Optional.) Configure a
description for the peer
group.
peer
group-name
description
text
By default, no description is
configured for the peer group.
6. Create the BGP IPv4
multicast address family and
enter its view.
address-family ipv4 multicast
By default, no BGP IPv4 multicast
address family exists.
7. Enable the router to
exchange IPv4 unicast
routing information used for
RPF check with peers in the
specified peer group.
peer
group-name
enable
By default, the router cannot
exchange IPv4 unicast routing
information used for RPF check
with the peers.
To configure an EBGP peer group by using Method 3 (IPv6 multicast address family):
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP instance view.
bgp
as-number [
instance
instance-name ]
N/A
3. Create an EBGP peer group.
group
group-name
external
By default, no EBGP peer groups
exist.

HPE FlexNetwork 5510 HI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5510 HI Series
Category	Switch
Language	English