Figure 4-23 Setting the protocol type
Passwords of an authentication protocol and proprietary protocol must
comply with the following policies:
– The password must consist of 8–15 characters and contain at least two
types of characters among uppercase letters (A–Z), lowercase letters (a–z),
and digits (0–9).
– A password must be
dierent from the corresponding user name or
inverted user name.
– A password must not be a string containing duplicate sections, such as
12a12a12a.
3. Set SHA Password and Conrm Password as planned, and tap , as
shown in Figure 4-24.
Figure 4-24 Setting an SHA password
NetCol5000-A025 In-row Air Cooled Smart Cooling
Product
User Manual (300 mm Width) 4 Power-On Commissioning
Issue 15 (2020-12-10) Copyright © Huawei Technologies Co., Ltd. 150