Huawei Quidway S3000-EI Series User Manual

Operation Manual - Security
Quidway S3000-EI Series Ethernet Switches
Chapter 2 AAA and RADIUS Protocol
Configuration
Huawei Technologies Proprietary
2-21
Operation Command
Disable of local
RADIUS authentication server
undo debugging er { all | error | debugging local-serv
event packet }
2.5 AAA and RADIUS Protoc Examples
or the hybrid configuration example of AAA/RADIUS protocol and 802.1x protocol,
Server
ol Configuration
F
refer to Configuration Example in 802.1x Configuration. It will not be detailed here.
2.5.1 Configuring FTP/Telnet User Authentication at Remote RADIUS
 Note:
Configuring Telnet user authentication at the remote server is similar to configuring
FTP users. The following description is based on Telnet users.
I. ments
to achieve through
proper configuration that the RADIUS server authenticates the Telnet users to be
registered.
O n
se address is 10.110.91.164. The pa anging messages between
th me
from username and sends the left part to the RADIUS server.
Networking Require
In the environment as illustrated in the following figure, it is required
ne RADIUS server (as authentication s
rver IP
erver) is connected to the switch a d the
ssword for exch
e switch and the authentication server is "expert”. The switch cuts off domain na

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English