Huawei Quidway S3000-EI Series - Displaying and Debugging BOOTP Client

Operation Manual - Network Protocol
Quidway S3000-EI Series Ethernet Switches Chapter 4
BOOTP Client Configuration
Huawei Technologies Proprietary
4-2
4.3 Displaying and Debugging BOOTP Client
After the above configuration, execute display command in any view to display the
running of the BOOTP client configuration, and to verify the effect of the configuration.
Execute debugging command in user view to debug BOOTP client.
Table 4-2 Displaying and debugging BOOTP client
Operation Command
Display information of BOOTP client
display bootp client interface
[
vlan-interface vlan_id ]
Disable/enable BOOTP client debugging [ undo ] debugging bootp client