Huawei Quidway S3000-EI Series User Manual

Operation Manual - Multicast
Quidway S3000-EI Series Ethernet Switches Chapter 2
IGMP Snooping Configuration
Huawei Technologies Proprietary
2-10
II. Networking diagram
Internet
Multicast
Switch
Router
g
n GMRP is disabled.
the switch.
Troubleshooting:
1) IGMP Snooping is disabled.
-configuration command to display the status of IGMP
Snooping.
P Snooping, you can input igmp-snooping enable in
P Snooping.
group is the expected one.
IGMP Snooping is not correct, turn to
nnel for help.
z Continue with diagnosis 3 if the second step is completed.
3) Multicast forwarding table set up on the bottom layer is wrong.
Figure 2-4 IGMP Snooping configuration networkin
III. Configuration procedure
# Display the status of GMRP.
<Quidway> display gmrp status
# Display the current status of IGMP Snooping whe
<Quidway> display igmp-snooping configuration
# Enable IGMP Snooping if it is disabled.
[Quidway] igmp-snooping enable
2.5 Troubleshoot IGMP Snooping
Fault: Multicast function cannot be implemented on
z Input the display current
z If the switch disabled IGM
the system view to enable IGM
2) Multicast forwarding table set up by IGMP Snooping is wrong.
z Input the display igmp-snooping group command to display if the multicast
z If the multicast group created by
professional maintenance perso

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English