Huawei Quidway S3000-EI Series User Manual

Operation Manual - Integrated Management
Quidway S3000-EI Series Ethernet Switches Chapter 2
HGMP V2 Configuration
Huawei Technologies Proprietary
2-4
z
te device. It can also
z
elivery the configuration and
z
tor device and hand-shaking interval etc.
func
2.2 Configure NDP
NDP is the protocol for discovering the related information of the adjacent points. NDP
ta link layer, so it supports different network layer protocols.
e ID, port
tion.
s the information in the
z Set NDP Holdtime
Network topology collection is implemented by NTDP. It is used for collecting the
information concerning device connection and the Candida
be used for setting hops for topology discovery.
Member identification positions every member device in the cluster, so that the
administrator device can identify them and d
management commands to them.
Membership management includes adding or removing a member, member
device authenticating the administra
The following sections describe the detailed configuration of cluster management
tions.
2.2.1 NDP Overview
runs on the da
NDP is used for discovering the information of the directly connected neighbors,
including the device type, software/hardware version, and connecting port of the
adjacent devices. It can also provide the information concerning devic
address, device capability and hardware platform, etc.
All the devices supporting NDP maintain the NDP information table. The table entry will
be removed by NDP automatically when the aging timer expires. You can also clear the
current NDP information to collect new adjacent informa
The device running NDP broadcasts the packets carrying NDP data to all the activated
ports regularly. The packet carries the holdtime, indicating how long the receiving
device has to keep the updating data. The receiver only keep
NDP packet, but not forwards it. The corresponding data entry in the NDP table will be
updated with the arriving information. If the new information is same as the old one,
only the holdtime will be updated.
NDP configuration includes:
z Enable/Disable system NDP
z Enable/Disable port NDP
z Set NDP timer

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English