Operation Manual - Security
Quidway S3000-EI Series Ethernet Switches
Chapter 2 AAA and RADIUS Protocol
Configuration
Huawei Technologies Proprietary
2-14
Table 2-15 Setting retransmission times of RADIUS request packet
Operation Command
Set retransmission times of RADIUS request packet
retry retry-times
Restore the default value of retransmission times
undo retry
By default, RADIUS request packet will be retransmitted up to three times.
2.3.6 Ena
RADIUS accounting server fails when the
accounting optional is configured, the user can still use the network resource,
Perform the following configurations in RADIUS scheme view.
bling The Selection Of Radius Accounting Option
If no RADIUS server is available or if
otherwise, the user will be disconnected.
Table 2-16 Enabling the selection of RADIUS accounting option
Operation Command
Enable the selection of RADIUS accounting option
accounting optional
Disable the selection of RADIUS accounting
undo accounting optional
option
mand in RADIUS scheme will no
longer send real-time a date packet or offline accoun
T e
a es this RADIUS scheme.
B
2.3.7 Settin erval
T et a terval.
fter the attribute is set, NAS will transmit the accounting information of online users to
llowing command to set a real-time accounting interval.
Perform the following configurations in RADIUS scheme view.
The user configured with accounting optional com
ccounting up ting packet.
he accounting optional command in RADIUS scheme
ccounting that us
view is only effective on th
y default, selection of RADIUS accounting option is disabled.
g a Real-time Accounting Int
o implement real-time accounting, it is necessary to s real-time accounting in
A
the RADIUS server regularly.
You can use the fo
Table 2-17 Setting a real-time accounting interval
Operation Command
Set a real-time accounting interval
timer realtime-accounting minutes
Restore the default value of the interval
undo timer realtime-accounting
To Next Page
Loading...
Need help?
General