EasyManuals Logo

Huawei Quidway S3000-EI Series User Manual

Huawei Quidway S3000-EI Series
383 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #295 background imageLoading...
Page #295 background image
Operation Manual - System Management
Quidway S3000-EI Series Ethernet Switches Chapter 4 System Maintenance and Debugging
Huawei Technologies Proprietary
4-1
Chapter 4 System Maintenance and Debugging
4.1 Basic System Configuration
4.1.1 Set Name for Switch
Perform the operation of sysname command in the system view.
Table 4-1 set name for Switch
Operation Command
Set the switch name
sysname sysname
Restore switch name to default value
undo sysname
4.1.2 Set the System Clock
Perform the operation of clock datetime command in the user view.
Table 4-2 Set the system clock
Operation Command
Set the system clock
clock datetime HH:MM:SS YYYY/MM/DD
4.1.3 Set the Time Zone
You can configure the name of the local time zone and the time difference between the
local time and the standard Universal Time Coordinated (UTC).
Perform the following operations in the user view.
Table 4-3 Setting the time zone
Operation Command
Set the local time
clock timezone zone_name { add |
minus } HH:MM:SS
Restore to the default UTC time zone
undo clock timezone
By default, the UTC time zone is adopted.

Table of Contents

Other manuals for Huawei Quidway S3000-EI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S3000-EI Series and is the answer not in the manual?

Huawei Quidway S3000-EI Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S3000-EI Series
CategorySwitch
LanguageEnglish

Related product manuals