Huawei Quidway S3000-EI Series User Manual

Operation Manual - Getting Started
Quidway S3000-EI Series Ethernet Switches Chapter 3
Command Line Interface
Huawei Technologies Proprietary
3-7
3.3.3 Hist
Key. The commands
rs can be automatically saved by the command line interface and you
10. T ach user.
e table below.
d
ory Command of Command Line
Command line interface provides the function similar to that of Dos
entered by use
can invoke and execute them at any time later. History command buffer is defaulted as
hat is, the command line interface can store 10 history commands for e
The operations are shown in th
Table 3-3 Retrieving history comman
Operation Key Result
Dis
com
command by user play history
mand
display
history-command
Display history
inputting
Retrieve the
Up cursor key
previous history
<↑> or Retrieve the previous history
command, if there is any.
command
<Ctrl+P>
Retrieve the next Down cursor key <↓> Retrieve the next history
history command or <Ctrl+N> command, if there is any.
 Note:
Cursor keys can be used to retrieve the history commands in Windows 3.X Terminal
rk, b
same purpose.
and Telnet. However, in Windows 9X HyperTerminal, the cursor keys ↑ and ↓ do not
wo ecause Windows 9X HyperTerminal defines the two keys differently. In this
keys <Ctrl+P> and <Ctrl+N> instead for the
case, use the combination
3.3.4 Common Command Line Error Messages
gram messages will be reported to users. The common
Table 3-4 Common command line error messages
All the input commands by users can be correctly executed, if they have passed the
mar check. Otherwise, error
error messages are listed in the following table.
Error messages Causes
Cannot find the command.
Cannot find the keyword.
Wrong parameter type.
Unrecognized command
The value of the parameter exceeds the range.
Incomplete command The input command is incomplete.
Too many parameters Enter too many parameters.

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English