Huawei Quidway S3000-EI Series User Manual

Operation Manual - VLAN
Quidway S3000-EI Series Ethernet Switches Chapter 4
Voice VLAN Configuration
Huawei Technologies Proprietary
4-3
enable Voice
VLAN features globally.
4.2.1 Enabling/Disabling Voice VLAN Features
Enable/disable the Voice VLAN in system view.
Table 4-2 Con
If you change the status of Voice VLAN security mode, you must first
figuring Voice VLAN features
Operation Command
Enable Voice VLAN features
voice vlan vlan-id enable
Disable Voice VLAN featu
ble
res
undo voice vlan ena
The VLAN mu s
a specified VLAN that has oice VLAN features and only one VLAN can
enable Voice VLAN at one t
4.2.2 Enabling/Disabling Voice
Perform the fo onfig
Table 4-3 Configuring Voice
st exist for a uccessful Voice VLAN features enabling. You cannot delete
enabled V
ime.
VLAN Features on a Port
uration in Ethernet port view. llowing c
VLAN features on a port
Operation Command
Enable the Voice VLAN features on a port
voice vlan enable
Disable the Voice VLAN features on a port
undo voice vlan enable
Only the Voice VLAN featu
Voice VLAN function on the
4.2.3 Setting/Removing the OUI Address Learned by Voice VLAN
Configure OUI addresses which can be learned by Voice VLAN using the following
the default OUI addresses as the standard of IP
Phone traffic.
AC addresses at most. Adding the OUI
r values of the MAC address.
res in system view and port view are all enabled can the
port run normally.
command; otherwise the system uses
The OUI address system can learn 16 M
add esses, you need only input the first three-byte
Perform the following configuration in system view.

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English