Huawei Quidway S3000-EI Series User Manual

Operation Manual - VLAN
Quidway S3000-EI Series Ethernet Switches Chapter 3
GARP/GVRP Configuration
Huawei Technologies Proprietary
3-5
d logout of VLAN are allowed on this port.
will add the port to the VLAN if a
nd the Trunk port allows the VLAN passing.
database, one link table for
ver, GVRP cannot learn dynamic VLAN through this
d and
Perf
Tabl
z When an Ethernet port is set to be in Normal registration mode, the dynamic and
manual creation, registration an
z When one Trunk port is set as fixed, the system
static VLAN is created on the switch a
GVRP will also add this VLAN item to the local GVRP
GVRP maintenance. Howe
port. The learned dynamic VLAN from other ports of the local switch will not be
able to send statements to outside through this port.
z When an Ethernet port is set to be in Forbidden registration mode, all the VLANs
except VLAN1 will be logged out and no other VLANs can be create
registered on this port.
orm the following configurations in Ethernet port view.
e 3-5 Set GVRP registration type
Operation Command
Set GVRP registration type
gvrp registration { normal | fixed |
forbidden }
Re registration
typ
undo gvrp registration
store the default GVRP
e
By default, GVRP registration type is normal.
3.2.5 Display and Debug GVRP
After the above configuration, execute dis d in any view to display the
r ration. Execute
debugging command in user view to debug the configuration of GVRP.
Display and debug GVRP
play comman
unning of GVRP configuration, and to verify the effect of the configu
Table 3-6
Operation Command
Display GVRP statistics information
display gvrp statistics [ interface
interface-list ]
Display GVRP global status information
display gvrp status
Enable GVRP packet or event
debugging
debugging gvrp { packet | event}
Disable GVRP packet or event
debugging
undo debugging gvrp { packet |
event }

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English