Huawei Quidway S3000-EI Series User Manual

Operation Manual - Network Protocol
Quidway S3000-EI Series Ethernet Switches Chapter 6
IP Performance Configuration
Huawei Technologies Proprietary
6-1
6.1.1 Configure TCP Attributes
TCP attributes that can be configured include:
kets, TCP starts the synwait timer. If
z e TCP connection state turns from FIN_WAIT_1 to
z range
Perf
Table 6-1 Configure TCP attributes
Chapter 6 IP Performance Configuration
6.1 IP Performance Configuration
IP performance configuration includes:
Configure TCP attributes
z synwait timer: When sending the syn pac
response packets are not received before synwait timeout, the TCP connection
will be terminated.
The timeout of synwait timer ranges 2 to 600 seconds and it is
75 seconds by default.
finwait timer: When th
FIN_WAIT_2, finwait timer will be started. If FIN packets are not received before
finwait timer timeout, the TCP connection will be terminated. Finwait timer ranges
76 to 3600 seconds. By default, finwait timer is 675 seconds.
The receiving/sending buffer size of connection-oriented Socket is in the
from 1 to 32K bytes and is 8K bytes by default.
orm the following configuration in System view.
Operation Command
Configure synwait r TCP connection
tcp ti imeout
timer time fo
establishment
mer syn-t
time-value
Restore synwait timer time for TCP connection
yn-timeout
establishment to default value
undo tcp timer s
Configure FIN_WAIT_2 timer time of TCP
tcp timer fin-timeout
time-value
Restore FIN_WAIT_2 timer time of TCP to default
t
value
undo tcp timer fin-timeou
Configure the Socket receiving/sending buffer size
tcp window window-size
of TCP
Restore the socket receiving/sending buffer size of
undo tcp window
TCP to default value

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English