Huawei Quidway S3000-EI Series User Manual

Operation Manual - STP
Quidway S3000-EI Series Ethernet Switches Chapter 1
MSTP Region-configuration
Huawei Technologies Proprietary
1-22
. For
Upon the change of port priority, MSTP will recalculate the port role and transit the state.
s a higher priority. If all the Ethernet ports of a
switch are configured with the same priority value, the priorities of the ports will be
1.2.12 Configure the Port (not) to Connect with the Point-to-Point Link
t) to connect with the point-to-point link in the following
ways.
I. Configure in system view
ystem view.
Table 1-18 Config ) to connect with the point
You can configure the port priority with either of the above-mentioned measures
more about the commands, refer to the Command Manual.
Generally, a smaller value represent
differentiated by the index number. The change of Ethernet port priority will lead to
spanning tree recalculation. You can configure the port priority per actual networking
requirements.
By default, the priority of all the Ethernet ports is 128.
The point-to-point link directly connects two switches.
You can configure the port (no
Perform the following configuration in s
ure the port (not -to-point link
Operation Command
Configure the port to connect with the
point-to-point link.
stp interface interface-list
point-to-point force-true
Configure the port not to connect with
the point-to-point link.
stp interface interface-list
point-to-point force-false
Configure MSTP to automatically de
if the port is directly connected with
tect
the
stp interface interface-list
point-to-point auto
point-to-point link.
Configure MSTP to automatically detect
the
undo stp interface interface-list
point-to-point
if the port is directly connected with
point-to-point link, as defaulted.
II. w
erform the following configuration in Ethernet port view.
Configure in Ethernet port vie
P
Table 1-19 Configure the port (not) to connect with the point-to-point link
Operation Command
Configure the port to connect with the point-to-point
link.
stp point-to-point
force-true

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English