Huawei Quidway S3000-EI Series User Manual

Operation Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches Chapter 1
ACL Configuration
Huawei Technologies Proprietary
1-8
the TCP pa an define the rule as “06”, the rule mask as “FF” and th fset
as 35. In this case, the rule mask coordinates with the offset and picks up the TCP
protocol nu the dat me and comp res it with the user-defin e
tring to get all the TCP packets.
ckets, you c e of
mber field from a fra a ed rul
s
 Note:
When user defines user-defined ACL, please calculate and set the correct offsets
according to the data frames of SNAP+tag format with the 802.3 standard described
above.
You can use the following comma
nds to define user-defined ACL.
erform the following configuration in corresponding view.
efining the user-defined ACL
P
Table 1-8 D
Operation Command
Enter user-defined ACL view(from
system
acl { number acl-number | name
acl-name user } [ match-order { config
view)
| auto } ]
Add a sub-item to the ACL(from
user-defined ACL view)
rule [ rule-id ] { permit | deny }
{ rule-string rule-mask offset }&<1-8>
[ time-range name ]
Delete a sub-item from the ACL(from
id
user-defined ACL view)
undo rule rule-
Delete one ACL or all the ACL(from
system view)
undo acl { number acl-number | name
acl-name | all }
T
1.2.3 Activating ACL
T ctive after activa
u a transmitted by the hardware of
s
Y
P wing configuration in system
he self-defined ACL are identified with the numbers ranging from 5000 to 5999.
he defined ACL can be a ted globally on the switch. This function is
sed to activate the ACL filtering or classify the dat
witch.
ou can use the following command to activ
erform the follo
ate the defined ACL.
view.

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English