Huawei Quidway S3000-EI Series User Manual

Operation Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches Chapter 1
ACL Configuration
Huawei Technologies Proprietary
1-11
rules for other department to access the payment server.
1.2 0.0.0.0 time-range huawei
# Define the rules for the Office of President to access the payment server.
Quidway-acl-adv-traffic-of-payserver] rule 2 permit ip source 129.111.1.2
. 2 0.0.0.0
i yserver
1.3.2 Bas
I.
II
# Define the
[Quidway-acl-adv-traffic-of-payserver] rule 1 deny ip source any destination
129.110.
[
0.0 0.0 destination 129.110.1.
3) Activate ACL.
# Activate the ACL traffic-of-payserver .
[Qu dway] packet-filter ip-group traffic-of-pa
ic ACL Configuration Example
Networking requirements
Using basic ACL, filter the packet which source IP address is 10.1.1.1 during time
range 8:00 ~ 18:00 every day.
. Networking diagram
Switch
#1
connect to Router
Figure 1-3 Access control configuration example
III. Configuration procedure
 Note:
In the following configurations, only the commands related to ACL configurations are
listed.
1) Define the time range
# Define time range from 8:00 to 18:00.
[Quidway] time-range huawei 8:00 to 18:00 daily
2) Define the ACL for packet which source IP is 10.1.1.1.
# Enter the named basic ACL, named as traffic-of-host.
of-host basic
# Define the rules for packet which source IP is 10.1.1.1.
[Quidway] acl name traffic-

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English