Huawei Quidway S3000-EI Series User Manual

Operation Manual - Security
Quidway S3000-EI Series Ethernet Switches
Chapter 2 AAA and RADIUS Protocol
Configuration
Huawei Technologies Proprietary
2-16
erver connection will
timeout in T and the r ounting interval of NAS is t, the art of the
result from dividing T by t is the value of count. Therefore, when ap d
th
B n 5
times
2.3.9 Enabling/Disabling Stopping Accounting Request Buffer
ffect the
essage to RADIUS accounting server.
Accordingly, if the message from Quidway Series Switches to RADIUS accounting
buffer and retransmit it
until the server responds or discards the messages after transmitting for specified times.
g to save the message or not. If save,
use the command to set the maximum retransmission times.
stopping accounting request buffer
How to calculate the value of retry-times? Suppose that RADIUS s
eal-time acc n the integer p
plied, T is suggeste
e numbers which can be divided exactly by t.
y default, the real-time accounting request can fail t
.
o be responded no more tha
Because the stopping accounting request concerns account balance and will a
amount of charge, which is very important for both the subscribers and the ISP, NAS
shall make its best effort to send the m
server has not been responded, switch shall save it in the local
The following command can be used for settin
Perform the following configurations in RADIUS scheme view.
Table 2-20 Enabling/Disabling
Operation Command
Enable stopping accounting request buffer
stop-accounting-buffer enable
Disable stopping accounting request buffer
ccounting-buffer
able
undo stop-a
en
B quest
2.3.10 Sett g ing
Request
y important for both the subscribers and the ISP, NAS
Perform the following configurations in RADIUS scheme view.
y default, the stopping accounting re will be saved in the buffer.
ing the Maximum Retransmittin Times of Stopping Account
Because the stopping accounting request concerns account balance and will affect the
amount of charge, which is ver
shall make its best effort to send the message to RADIUS accounting server.
Accordingly, if the message from Quidway Series Switch to RADIUS accounting server
has not been responded, switch shall save it in the local buffer and retransmit it until the
server responds or discards the messages after transmitting for specified times. Use
the command to set the maximum retransmission times.

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English