Operation Manual - Getting Started
Quidway S3000-EI Series Ethernet Switches Chapter 3
Command Line Interface
Huawei Technologies Proprietary
3-6
3) Input a command with a “?” separated by a space. If this position is for parameters,
all the parameters and their brief descriptions will be listed.
[Q
<1-4094> VLAN interface number
[Quidway] interface vlan 1 ?
<c ram s po next co
the command, you can press <Enter> to execute it directly.
4) cter string with a “?”, then all the commands with this character string
as their initials will be listed.
<Q
i
5) Input a command with a character string and “?”, then all th s with this
character string as their initials in the command will be listed
<Q
Input the first letters of a keyword of a co press < If no other
keywords are headed by this letters, then this unique keyw
7) y
language-mode command.
3.3.2 Displaying Characteristics of Command Line
z For users’ convenience, the instruction and help information can be displayed in
ayed exceeding one screen, pausing function is
he table below.
ns of displaying
uidway] interface vlan ?
<cr>
r> indicates no pa
Input a chara
eter in thi sition. The mmand line repeats
uidway>pi?
ng
p
e key word
.
uidway> display ver?
version
6) mmand and Tab> key.
ord will be displayed
automatically.
To switch to the
Chinese displa for the above information, perform the
Command line interface provides the following display characteristics:
both English and Chinese.
z For the information to be displ
provided. In this case, users can have three choices, as shown in t
Table 3-2 Functio
Key or Command Function
Press <Ctrl+C> when the display
pauses
Stop displaying and executing command.
Enter a space when the display Continue to display the next screen of
pauses
information.
Press <Enter> when the display Continue to display the next line of
formation.
pauses
in
To Next Page
Loading...
Need help?
General