Huawei Quidway S3000-EI Series User Manual

Operation Manual - Multicast
Quidway S3000-EI Series Ethernet Switches Chapter 1
GMRP Configuration
Huawei Technologies Proprietary
1-2
B led.
1.2.2 Enable/Disable GMRP on the Port
tion in Ethernet port view.
port
y default, GMRP is disab
Perform the following configura
Table 1-2 Enable/Disable GMRP on the
Operation Command
Enable GMRP on the port
gmrp
Disable GMRP on the port
un
do gmrp
G bally before en n a port.
B on the port.
1.3 Display and debug GMRP
play command in any view to display the
verify the effect of the configuration.
r view to debug GMRP configuration.
Table 1-3 Display and debug GMRP
MRP should be enabled glo abled o
y default, GMRP is disabled
After the above configuration, execute dis
running of the GMRP configuration, and to
Execute debugging command in use
Operation Command
Display GMRP statistics.
interface_list ]
display gmrp statistics [ interface
Display GMRP global status.
display gmrp status
Enable GMRP debugging
debugging gmrp event
Disable GMRP
undo debugging ent
debugging
gmrp ev
1.4 GMRP Configuration Example
I. Net
plement dynamic registration and update of multicast information between switches.
working requirements
Im

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English