Huawei Quidway S3000-EI Series User Manual

Operation Manual - Multicast
Quidway S3000-EI Series Ethernet Switches Chapter 5
Multicast VLAN Configuration
Huawei Technologies Proprietary
5-3
Note: 
z The isolate vlan cannot be set to a multicast VLAN.
e multicast VLAN can be specified for a port.
n only be hybrid.
z Only on
z The type of the ports connected with user terminals ca
5.3 Multicast VLAN Configuration Example
The devices and requirements are as follows:
I. Network requirements
Device Role Description
Switch A Layer ch
ss of the VLAN 20 interface is
168.10.1.1; The port E1/0/1 belongs to VLAN 20 and
is connected with th
3 swit
The IP addre
e workstation.
VLAN 10 acts as a multicast VLAN.
The port E1/0/10 is connected with switch B.
Switch B Layer 2 switch
ch is connected
rt E1/0/2, which
VLAN 2 includes the port E1/0/1, whi
with PC1; the VLAN 3 includes the po
is connected with PC2.
The port E1/0/10 is connected with switch A.
PC 1 User 1 PC1 is connected with switch B through port E1/0/1.
PC 2 User 2 1/0/2.PC2 is connected with switch B through port E
p the fol ulticast V
to receive multicast streams through the multicast VLAN.
erform lowing m LAN configuration to allow users in VLAN 2 and VLAN
3

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English