Huawei Quidway S3000-EI Series User Manual

Operation Manual - Getting Started
Quidway S3000-EI Series Ethernet Switches Chapter 4 Use
r Interface Configuration
Huawei Technologies Proprietary
4-2
4.2 User Interface Confi
User interface configuratio
z ring user interfac
z Configuring the user
z Configuring the attrib
Configuring the terminal attributes
Managing users
z redirection
4.2.1 Entering User Interface View
The following command is used for entering a user interface view. You can enter a
single user interface view or multi user interface view to configure one or more user
interfaces respectively.
Perform the following configuration in system view.
Table 4-1 Entering user interface view
guration
n includes:
e view
interface-supported protocol
utes of AUX (Console) port
Ente
z
z
Operation Command
Enter a single user interface view or multi
user interface views
user-interface [ type ] first-number
[ last-number ]
4.2.2 Configuring the User Interface-Supported Protocol
The following command is used for setting the supported protocol by the current user
interface. You can log in switch only through the supported protocol. The configuration
becomes effective when you log in again.
Perform the following configurations in user interface (VTY user interface only) view.
Table 4-2 Configuring the user interface-supported protocol
Operation Command
Configure the user interface-supported
protocol
protocol inbound { all | ssh |
telnet }
By default, the user interface supports Telnet and SSH protocols.

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English