Huawei Quidway S3000-EI Series User Manual

Operation Manual - Getting Started
Quidway S3000-EI Series Ethernet Switches Chapter 4
User Interface Configuration
Huawei Technologies Proprietary
4-4
III
Table 4-5 Configuring parity on the AUX (Console) port
. Configuring parity on the AUX (Console) port
Operation Command
Configure parity mode on the AUX (Console) parity { even | mark | none |
odd | space }
port
R store the default parity mode e
undo parity
By default, the parity on the AUX (Console) port is none, that is, no parity bit.
IV bit of AUX (Console) port
Table 4-6 Configuring the stop bit of AUX (Console) port
. Configuring the stop
Operation Command
Configure the stop bit of AUX (Console) port stopbits { 1 | 1.5 | 2 }
Restore the default stop bit of AUX (Console) port
undo stopbits
By default, AUX (Console) port supports 1 stop bit.
V onsole) port
Table 4-7 Config a bit of AUX (Console) port
. Configuring the data bit of AUX (C
uring the dat
Operation Command
Configure the data bit of AUX (Console) por bits { 7 | 8 } t data
Restore the default data bit of AUX (Console) port
undo databits
By default, AUX (Console) port supports 8 data bits.
4.2.4 Con
The following commands can be used for configuring the terminal attributes, including
r
interface, configuring terminal screen length and history command buffer size.
Perform the following configuration in user interface view. Perform lock command in
user view.
I. Enabling/disabling terminal service
fter the terminal service is disabled on a user interface, you cannot log in to the switch
through the user interface. However, the user logged in through the user interface
fter such user logs
figuring the Terminal Attributes
enabling/disabling terminal service, disconnection upon timeout, lockable use
A
before disabling the terminal service can continue his operation. A

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English