Huawei Quidway S3000-EI Series User Manual

Operation Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches Chapter 1
ACL Configuration
Huawei Technologies Proprietary
1-3
tion to ACL Table 1-2 Quantitative limita
Item Value range
Numbered basic ACL. 2000 to 2999
Numbered advanced ACL. 3000 to 3999
Numbered Layer-2 ACL. 4000 to 4999
Numbered user-d ACL. 5000 to 5999efined
Named basic ACL. -
Named advanced ACL. -
Named Layer-2 ACL. -
Named user-defined ACL. -
The sub items of an ACL o 127 0 t
1.2 Configuring ACL
A
Configuring the time range
z Defining ACL
The above three steps had better be taken in sequence. Configure time range first and
fined time range in the definition), followed activating ACL
1.2.1 Con ange
inute, hour. Date range is expressed in the units of minute, hour, date,
month and year. The periodic time range is expressed in the day of the week.
and to set the time range by performing the following
CL configuration includes:
z
z Activating ACL
then define ACL (using the de
to validate it.
figuring the Time-R
The process of configuring a time-range includes the steps of configuring the
hour-minute range, date ranges and period range. The hour-minute range is expressed
in the units of m
You can use the following comm
configuration in the system view.
Table 1-3 Setting the absolute time range
Operation Command
Set the absolute
time range
days-of-the-week [ from start-time start-date ] [ to end-time
end-date ] | from start-time start-date [ to end-time
end-date ]
time-range time-name { start-time to end-time
}

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English