Huawei Quidway S3000-EI Series User Manual

Operation Manual - Integrated Management
Quidway S3000-EI Series Ethernet Switches Chapter 2
HGMP V2 Configuration
Huawei Technologies Proprietary
2-14
device and no cluster name has been
specified.
2.4.6 Add/Delete a Cluster Member device
Y evice or delete a member
d
erform the following configuration in cluster view.
By default, the switch is not an administrator
ou can use the following command to ad
evice.
d a member d
P
Table 2-17 Add/Delete a cluster member device
Operation Command
Add a cluster member device.
add-member [ member-num ] mac-address
H-H-H [ password password ]
Delete a cluster member device.
delete-member member-num
Note that, adding/deleting a member device must be performed on the administrator
pt will be given.
e member device newly added,
ber to it automatically.
automatically set
administrator’s password h’s password.
2.4.7 Set u
T to setup a
cluster step by step on an administrator-capable device, using the following command.
After auto-build is executed, the system will ask you to enter a cluster name. Then the
matic setup, you are allowed to enter <CTRL + C> to cancel the
etup process, however, the switches already added to the cluster will not be
removed.
r view.
device, otherwise, error prom
It is not necessary for you to assign a number for th
because the administrator device will assign an available num
When a switch is added to a cluster, the administrator will
as the switc
p a Cluster Automatically.
he system provides cluster auto-setup function. You can follow the prompts
discovered Candidate devices within the specified hops will be listed. You can confirm
the operation and add all the listed candidates to the new cluster.
In the process of auto
operation. And then the system stops adding new switch to the cluster and exits the
automatic s
Perform the following configuration in cluste
Table 2-18 Automatic cluster setup
Operation Command
Setup a cluster automatically. auto-build [ recover ]
Note that you can only execute the above command on the command-capable device.

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English