Huawei Quidway S3000-EI Series User Manual

Operation Manual - VLAN
Quidway S3000-EI Series Ethernet Switches Chapter 3
GARP/GVRP Configuration
Huawei Technologies Proprietary
3-4
globally before it
of GVRP registration type can only take effect
des, GVRP must be configured on the Trunk port.
3.2.2 Ena /
GVRP is described in details in the IEEE 802.1Q standard. Quidway Series Ethernet
Switches fully support the GARP compliant with the IEEE standards.
Main GVRP configuration includes:
z Enable/Disable global GVRP
z Enable/Disable port GVRP
z Set GVRP registration type
In the above-mentioned configuration tasks, GVRP should be enabled
is enabled on the port. Configuration
after the port GVRP is enabled. Besi
ble Disable Global GVRP
You can use the following command to enable/disable global GVRP.
Perform the following configurations in system view.
Table 3-3 Enable/Disable global GVRP
Operation Command
Enable global GVRP
gvrp
Disable global GVRP
undo gvrp
By default, global GVRP is disabled.
3.2.3 Enable/Disable Port GVRP
You can use the following command to enable/disable the GVRP on a port.
Perform the following configurations in Ethernet port view.
Table 3-4 Enable/Disable port GVRP
Operation Command
Enable port GVRP
gvrp
Disable port GVRP
undo gvrp
GVRP should be enabled globally before it is enabled on the port. The GVRP can only
By default, port GVRP is disabled.
3.2.4 Set GVRP Registration Type
T types include Norma orbidden (see IEEE 802.1Q).
be enabled/disabled on Trunk port.
he GVRP registration l, Fixed and F

Huawei Quidway S3000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S3000-EI Series
Category	Switch
Language	English