Operation Manual - System Management
Quidway S3000-EI Series Ethernet Switches Chapter 4 System Maintenance and Debugging
Huawei Technologies Proprietary
4-8
Severity Description
debugging Debugging information
Notice: There is a slash between severity and digest.
6) Digest
The digest is abbreviation, it represent the abstract of contents.
Notice: There is a colon between digest and content.
7) Content
It is the contents of logging information.
4.5.2 Info-center Configuration
Switch supports 6 output directions of information.
The system assigns a channel in each output direction by default. See the table below.
Table 4-12 Numbers and names of the channels for log output
Output direction Channel number Default channel name
Console 0 console
Monitor 1 monitor
Info-center loghost 2 loghost
Trap buffer 3 trapbuf
Logging buffer 4 logbuf
snmp 5 snmpagent
 Note:
The settings in the six directions are independent from each other. The settings will
take effect only after enabling the information center.
The info-center of Ethernet Switch has the following features:
z Support to output log in six directions, i.e., Console, monitor to Telnet terminal,
logbuf, loghost, trapbuf, and SNMP.
z The log is divided into 8 levels according to the significance and it can be filtered
based on the levels.
z The information can be classified in terms of the source modules and the
information can be filtered in accordance with the modules.
z The output language can be selected between Chinese and English.
To Next Page
Loading...
Need help?
General