Operation Manual - QoS/ACL
Quidway S3000-EI Series Ethernet Switches Chapter 2
QoS Configuration
Huawei Technologies Proprietary
2-10
or details about the command, refer to the Command Manual.
2.2.8 Con
The functio g is to copy the traffic L rule to the
d ated observing port to analyze and monitor the packets.
Y n use the following command to configure the traffic mirroring.
Perform the following configuration in system view.
Table 2-13 Configuring traffic mirroring
F
figuring Traffic Mirroring
n of Traffic mirrorin matching AC
esign
ou ca
Operation Command
Configure traffic
mirrored-to { user-group acl-number | acl-name [ rule rule ] |
{ ip-group { acl-number | acl-name } [ rule rule ] | link-group
mirroring
{ acl-number | acl-name } [ rule rule ] }* } interface
{ interface-name | interface-type interface-num }
Cancel the
configuration of
undo mirrored-to { user-group acl-number | acl-name [ rule
rule ] | { ip-group { acl-number | acl-name } [ rule rule ] |
le rule ] }* }
traffic mirroring link-group { acl-number | acl-name } [ ru
For details about the command, refer to th mand Manual.
2.2.9 Configuring Traffic Statistics
The traffic statistics function is used for counting the data packets of the specified traffic,
that is, this function counts the transmitted ta which matches the ACL rules. After the
traffic statistics function is configured, the user can use display qos-global
t fic-statistic command to display the s istics information.
Y can use the following command to configure traffic statistics.
Perform the following configuration in system view.
able 2-14 Configuring traffic statistics
e Com
da
raf tat
ou
T
Operation Command
Configure traffic
traffic-statistic { user-group
rule ] | { ip-group { acl-num
statistics
{ acl-number | acl-name } [ rule
ber | acl-name } [ rule rule ] |
{ acl-number | acl-name } [ rule rule ] }* }
link-group
Cancel the
configur
traffic statistics
undo traffic-statistic { user-group { acl-number | acl-name }
rule rule ] | { ip-group { acl-n ame } [ rule rule ] |
link-group -number | acl-nam
ation of [ umber | acl-n
{ acl e } [ rule rule ] }* }
Display the
statistics
information
display q
os-global traffic-statistic
For details about the command, refer to the Command Manual.