Huawei SmartAX MA5608T User Manual

Figure 1-86 Setting TFTP parameters
----End
Reference
l Any PC that runs the TFTP software can serve as a TFTP server.
l The IP address in the Server interfaces drop-down list is the IP address of the TFTP server.
The TFTP application can identify the IP address automatically. If the TFTP server has
multiple IP addresses, select the correct one.
l If the TFTP file transfer fails, check the following items:
– Whether the selected IP address of the TFTP server is correct.
– Whether the TFTP server can ping the inband or outband Ethernet port of the MA5600T/
MA5603T/MA5608T (run the Ping command).
– Whether the TFTP application is run on the TFTP server.
– Whether the path is correctly set in the TFTP application.
– Whether the TFTP file transfer function has been enabled through the command.
– Whether the entered name of the file to be transferred is correct.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
1 Commissioning
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
201

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE