Huawei SmartAX MA5608T User Manual

vlan forwarding 50 vlan-connect
port vlan 50 0/19 0
port vlan 50 0/19 1
link-aggregation 0/19 0 0/19 1 egress-ingress workmode lacp-static
interface adsl 0/2
deactivate 0
activate 0 profile-index 1
alarm-config 0 1
quit
service-port 1 vlan 50 adsl 0/2/0 vpi 1 vci 39 inbound traffic-table index 5
outbound traffic-table index 5
service-port desc 1 description Vlanid:50/adsl/vpi:1vci:39/stacking
stacking label service-port 1 10
stacking inner-priority service-port 1 4
pitp enable pmode
raio-mode cntel pitp-pmode
save
Configuration File in the SHDSL access mode:
vlan 50 smart
vlan attrib 50 stacking
vlan forwarding 50 vlan-connect
port vlan 50 0/19 0
port vlan 50 0/19 1
link-aggregation 0/19 0 0/19 1 egress-ingress workmode lacp-static
shdsl line-profile quickadd 3 ptm rate 512 2048
interface shl 0/3
deactivate 1
activate 1 3
alarm-config 1 1
quit
service-port 2 vlan 50 shdsl mode ptm 0/3/1 inbound traffic-table index 5 outbound
traffic-table index 5
service-port desc 2 description Vlanid:50/shdsl/vpi:1vci:39/stacking
stacking label service-port 2 10
stacking inner-priority service-port 2 4
pitp enable pmode
raio-mode cntel pitp-pmode
save
Configuration File in the VDSL access mode:
vlan 50 smart
vlan attrib 50 stacking
vlan forwarding 50 vlan-connect
port vlan 50 0/19 0
port vlan 50 0/19 1
link-aggregation 0/19 0 0/19 1 egress-ingress workmode lacp-static
vdsl line-profile quickadd 3 snr 60 0 300 60 0 300
vdsl channel-profile quickadd 3 path-mode ptm interleaved-delay 8 2 inp 4 2 rate
128 10000 128 10000 2048 2048
interface vdsl 0/4
deactivate 1
activate 1 template-index 3
alarm-config 1 1
quit
service-port 3 vlan 50 vdsl mode ptm 0/4/1 inbound traffic-table index 5 outbound
traffic-table index 5
service-port desc 3 description Vlanid:50/vdsl/vpi:1vci:39/stacking
stacking label service-port 3 10
stacking inner-priority service-port 3 4
stacking inner-priority service-port 2 4
pitp enable pmode
raio-mode cntel pitp-pmode
save
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
3 Configuring the DSLAM Services
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
259

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE