Huawei SmartAX MA5608T - Page 337

Item Data
System parameters According to the Background
Information in (Optional) Configuring
the System Parameters and confirmed
with the service provider, the default
settings can meet the service
requirements. Therefore, the system
parameters are not configured here.
Overseas parameters According to the Background
Information in (Optional) Configuring
the Overseas Parameters and
confirmed with the service provider,
the default settings can meet the service
requirements. Therefore, the overseas
parameters are not configured here.
PSTN port attributes The polarity reversal accounting is
adopted, and therefore the PSTN port
to which the users belong needs to
support the polarity reversal pulse. The
other attributes of the PSTN port do not
need to be modified.
Ringing current attributes There is no special requirement, and the
configuration of the ringing current
attributes is not required.
Figure 3-10 shows an example network for configuring the MGCP-based VoIP service.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide 3 Configuring the DSLAM Services
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
312