Huawei SmartAX MA5608T User Manual

Table 3-6 Data plan
Item Data
The data plan of the ISDN BRA service based H.248 protocol
H.248 interface ID 0
IUA link set
parameter
IUA link set ID 1
Working mode
of a link set
override
Pending time 10s
Mode of
generating the
interface ID
2
Whether the
link in the link
set supports the
interlocking
enable
Service
environment
corresponding
to the IUA link
set
client
IUA link
parameter
IUA link ID 15
Local port ID 1401
Local IP
address
10.13.4.116/16 (It must exist in the signaling IP
address pool.)
Remote port ID 1400
IP address of
the primary
MGC
10.14.1.2/16 (IP address of the primary MGC)
MGC that is
bound to the
IUA link
primary-mgc
Priority of the
IUA link.
3
ISDN BRA port Subrack ID/
Slot ID/Port ID
0/2/0
IUA interface
ID
8
Working mode P2P
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide 3 Configuring the DSLAM Services
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
325

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE