Huawei SmartAX MA5608T User Manual

Data Plan
Table 3-8 provides the data plan for configuring the P2P ISDN BRA service.
Table 3-8 Data plan for configuring the P2P ISDN BRA service
Item Data
MG interface ID 0
ISDN BRA port Subrack ID/
Slot ID/Port ID
0/2/0, 0/3/0
Working mode P2P
Phone number 12345601, 12345602
Automatic
deactivation
Disabled
Activation
mode
Stable activation
Procedure
Step 1 Configure the working mode of the ISDN BRA port.
In the BRA port mode, configure the working mode of the ISDN BRA port to P2P, configure
the activation mode to stable activation, and disable automatic activation.
huawei(config)#braport
huawei(config-braport)#braport attribute set 0/2/0 workmode p2p activemode stable-
active autodeactive disable
huawei(config-braport)#braport attribute set 0/3/0 workmode p2p activemode stable-
active autodeactive disable
huawei(config-braport)#quit
Step 2 Configure the ISDN BRA user data.
huawei(config)#esl user
huawei(config-esl-user)#sipbrauser add 0/2/0 0 telno 12345601
huawei(config-esl-user)#sipbrauser add 0/3/0 0 telno 12345602
huawei(config-esl-user)#quit
Step 3 Save the data.
huawei(config)#save
----End
Result
After the configuration is completed, two ISDN BRA users of ports 0/2/0 and 0/3/0 can call each
other successfully.
Configuration File
braport
braport attribute set 0/2/0 workmode p2p activemode stable-active autodeactive
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
3 Configuring the DSLAM Services
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
334

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE