Huawei SmartAX MA5608T User Manual

Figure 3-18 Example of the ISDN PRA service
Data Plan
Table 3-12 provides the data plan for configuring the ISDN PRA service.
Table 3-12 Data plan for configuring the ISDN PRA service
Item Data
MG interface ID 0
ISDN PRA port Subrack ID/Slot
ID/Port ID
0/2/0
Phone number 12345600
Procedure
Step 1 Configure the ISDN PRA user data.
huawei(config)#esl user
huawei(config-esl-user)#sipprauser add 0/2/0 0 telno 12345600
huawei(config-esl-user)#quit
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
3 Configuring the DSLAM Services
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
345

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE