Huawei SmartAX MA5608T User Manual

> 3: G.DMT (G992.1/3/5,G993.2)
> 4: G.HS (G992.1~5,G993.2)
> 5: ADSL (G.992.1~5,T1.413)
> 6: VDSL (G993.2)
> Please select (0~6) [1]:
> Please select the form of transmit rate adaptation downstream:
> 1-fixed 2-adaptAtStartup (1~2) [2]:
> Please select the form of transmit rate adaptation upstream:
> 1-fixed 2-adaptAtStartup (1~2) [2]:
> Will you set SNR margin parameters? (y/n) [n]:
> Will you set DPBO parameters? (y/n)[n]:
> Will you set UPBO parameters? (y/n)[n]:
> Will you set RFI notch configuration parameter? (y/n) [n]:
> Will you set ADSL tone blackout configuration parameter? (y/n) [n]:
> Will you set VDSL tone blackout configuration parameter? (y/n) [n]:
> Will you set mode-specific parameters? (y/n) [n]:
Add profile 10 successfully
2. Configure the VDSL2 channel profile.
You can configure the VDSL2 channel profile based on your requirements.
huawei(config)#vdsl channel-profile add 10
Start adding profile
Press 'Q' to quit the current configuration and new configuration will be
neglected
> Do you want to name the profile (y/n) [n]:
> Data path mode 1-ATM, 2-PTM, 3-Both (1~3) [3]:1
> Will you set the minimum impulse noise protection? (y/n) [n]:y
> Minimum impulse noise protection downstream:
> 1-noProtection 2-halfSymbol 3-singleSymbol 4-twoSymbols
> 5-threeSymbols 6-fourSymbols 7-fiveSymbols 8-sixSymbols
> 9-sevenSymbols 10-eightSymbols 11-nineSymbols 12-tenSymbols
> 13-elevenSymbols 14-twelveSymbols 15-thirteenSymbols 16-
fourteenSymbols
> 17-fifteenSymbols 18-sixteenSymbols
> Please select (1~18) [1]:3
> Minimum impulse noise protection upstream:
> 1-noProtection 2-halfSymbol 3-singleSymbol 4-twoSymbols
> 5-threeSymbols 6-fourSymbols 7-fiveSymbols 8-sixSymbols
> 9-sevenSymbols 10-eightSymbols 11-nineSymbols 12-tenSymbols
> 13-elevenSymbols 14-twelveSymbols 15-thirteenSymbols 16-
fourteenSymbols
> 17-fifteenSymbols 18-sixteenSymbols
> Please select (1~18) [1]:3
> Will you set interleaving delay parameters? (y/n) [n]:y
> Maximum interleaving delay downstream (0~200 ms) [20]:
> Maximum interleaving delay upstream (0~200 ms) [20]:
> Will you set parameters for rate? (y/n) [n]:y
> Minimum transmit rate downstream (128~100000 Kbps) [128]:512
> Maximum transmit rate downstream (512~100000 Kbps) [100000]:
> Minimum transmit rate upstream (128~100000 Kbps) [128]:
> Maximum transmit rate upstream (128~100000 Kbps) [100000]:
Add profile 10 successfully
3. Configure the VDSL2 line template.
Bind the preceding configured line profile and the channel profile together in the line
template with the index of 10.
huawei(config)#vdsl line-template add 10
Start adding template
Press 'Q' to quit the current configuration and new configuration will be
neglected
> Do you want to name the template (y/n) [n]:
> Please set the line-profile index (1~128) [1]:10
> Will you set channel configuration parameters? (y/n) [n]:y
> Please set the channel number (1~2) [1]:
> Channel1 configuration parameters:
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
7 Example: Subtending Networking
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
540

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE