b. On the General ONT VAS Profile tab page, right-click, and choose Add from
the shortcut menu.
c. In the dialog box that is displayed, set Name to ONT-VoIP.
d. Configure the parameters of a voice WAN port.
a. In the navigation tree, choose General Para > WAN Device > WAN
Device 1 > WAN Connection. Select WAN Connection, right-click, and
choose Add IP Connection from the shortcut menu.
b. Select WAN IP Interface 1 and enter (or select) a proper value.
– WAN Enable: enable
– Connection Type: Routed
– VLAN ID: 300 (The VLAN ID of the ONT must be the same as the user-side
VLAN ID configured on the OLT.)
– Priority: 5
– Addressing Type: DHCP
e. Configure parameters of the voice protocol.
In the navigation tree, choose General Para > Services > Voice Service > Voice
Service 1 > Interface configuration > Interface 1. Select Interface 1 and select
a proper value.
– Signaling Protocol: H.248
– Associate WAN Interface: WAN1 (binding the created voice WAN port)
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide 9 FTTH Configuration
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
675
To Next Page
Loading...
