Huawei SmartAX MA5608T User Manual

huawei(config)#interface gpon 0/1
huawei(config-if-gpon-0/1)#ont add 1 1 password-auth 0100000001 once-
on no-aging omci
huawei(config-if-gpon-0/1)#ont add 1 2 password-auth 0100000002 once-
on no-aging omci
b. Discover ONTs automatically.
If the password or SN of an ONT is unknown, run the port portid ont-auto-
find command in GPON mode to enable the ONT auto-discovery function of the
GPON port. Then, run the ont confirm command to confirm the ONT.
huawei(config)#interface gpon 0/1
huawei(config-if-gpon-0/1)#port 1 ont-auto-find enable
huawei(config-if-gpon-0/1)#display ont autofind 1
//After this command is executed, the information of all ONTs
connected to the GPON port through optical splitters is displayed.
---------------------------------------------------------------------
---
Number : 1
F/S/P : 0/1/1
Ont SN : 32303131D659FD40
Password :
VenderID : HWTC
Ont Version : 120A0000
Ont SoftwareVersion : V1R001C01
Ont EquipmentID : EchoLife:HG8245
Ont autofind time : 2009-10-24 14:59:10
---------------------------------------------------------------------
---
Number : 2
F/S/P : 0/1/1
Ont SN : 6877687714852901
Password :
VenderID : HWTC
Ont Version : 120A0000
Ont SoftwareVersion : V1R001C01
Ont EquipmentID : EchoLife:HG8245
Ont autofind time : 2009-10-24 14:59:12
---------------------------------------------------------------------
---
huawei(config-if-gpon-0/1)#ont confirm 1 ontid 1 sn-auth
32303131D659FD40 omci
huawei(config-if-gpon-0/1)#ont confirm 1 ontid 2 sn-auth
6877687714852901 omci
c. (Optional) Bind the alarm profile to the ONT.
The default profile 1 is used in this example.
huawei(config-if-gpon-0/1)#ont alarm-profile 1 1 profile-id 1
huawei(config-if-gpon-0/1)#ont alarm-profile 1 2 profile-id 1
3. Confirm that the ONTs go online successfully.
After an ONT is added, run the display ont info command to query the current status
of the ONT. Ensure that Config flag of the ONT is active, Run State is online, Config
state is normal, and Match state is match.
huawei(config-if-gpon-0/1)#display ont info 1 1
---------------------------------------------------------------------
F/S/P :
0/1/1
ONT-ID :
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
9 FTTH Configuration
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
712

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE