Huawei SmartAX MA5608T User Manual

Figure 10-2 Configuration roadmap in FTTD networking using a bridging+voice ONU
The following table describes the configuration steps.
Item Step Description
Optical
line
termina
l (OLT)
10.6.1.3 Adding an ONU to an
OLT
Services can be configured for an optical
network unit (ONU) only after the ONU is
added to an optical line terminal (OLT).
OLT 10.6.1.4 Configuring a VDSL2
User Port
Services can be transmitted only after a
VDSL2 port on an optical network unit
(ONU) is activated.
OLT
HGW
10.6.1.5 Configuring the Internet
Access Service
None
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide 10 FTTD Configuration
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
742

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE