Figure 1-42 Interface for logging in to the system using the SSH client software
The user authentication mode is set to the RSA authentication mode, and the system
therefore displays the prompt, as shown in Figure 1-43. Input the user name to log in to
the system (here, the user name is huawei).
Figure 1-43 Interface for logging in to the system using the SSH client software
----End
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
1 Commissioning
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
60
To Next Page
Loading...
