Husqvarna TE 310 - Crankshaft and Counter Balancing Shaft Disassembly (SMR 450-510)

F.24 Part. N. 8000 H1344 (10-2009)
ENGINE DISASSEMBLY
Crankshaft and counter balancing shaft disassembly (SMR 450-510)
Place the puller bushing on the R.H.S. of the crankshaft.
Fix the puller on the crankcase half and push out th crankshaft (strike lightly the
layshaft with a rubber hammer in order to avoid it from getting stuck).