I.9
Part. N. 8000 H1344 (10-2009)
FRONT SUSPENSION
GENERAL RULES FOR A PROPER OVERHAULING
-
ted
-
gents
oil.
and kept in the relevant special containers, then disposed of according to the regulations in force.
to unscrew them.
-
tching or cutting the components with the screwdriver tip.
If this is not the case, or if you are unsure, please contact an authorized service center, where specialized technicians with the right
tools and original spare parts will service and overhaul your fork, putting it back into its original working conditions.
INSTRUCTIONS FOR CLAMPING IN THE VICE
For some maintenance procedures you may have to use the vice to clamp
some components of the fork.
WARNING
The incorrect use of the vice can cause irreparable damage to the fork.
Scrupulously follow the instructions below:
necessary;
the part;
A - Wheel axle clamp
C - Top part of pumping element rod above the seat of the spring guide stop ring.
D - Bottom valve spanner seizing
To Next Page
Loading...
