EasyManua.ls Logo

Husqvarna TE 310 - Electronic Ignition System (Te-Smr)

Husqvarna TE 310
420 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
M.18 Part. N. 8000 H1344 (10-2009)
ELECTRIC SYSTEM, DIGITAL INSTRUMENT
ELECTRONIC IGNITION SYSTEM (TE-SMR)
The ignition system is controlled by the ECU (1). The system belongs to the category of the integrated systems of digital electronic igni-
tion with advance and static distribution and gasoline electronic injection of intermittent sequential balanced type. This ignition system
consists of a sensor of the crankshaft position (Pick-up), an ECU, an ignition coil and an air pressure sensor of the intake manifold.
The feeding of the ignition coil is supplied by the battery with a power relay and is controlled by the ECU. The synchronization of the
ignition is checked with precision with regard to the engine r.p.m. and the position of the throttle control. Besides this basic condition,
also the temperature and air pressure sensors and the coolant temperature inuence the synchronization of the ignition.
- Electronic power unit (1) (ECU);
- W.T.S. (33) (Water Temperature Sensor);
- Ignition coil (23);
- Fuel pump (35);
- Clutch switch (27);
- Ignition switch (26);
- O2 sensor heater (31);
- Battery (16);
- Electric start remote control switch (17);
- Starting motor (18);
- Voltage regulator-rectier (3);
- Alternator (2);
- Gear shift position sensor (22);
- M.A.Q.S. (40) (pressure sensor +TPS sensor + air temperature sensor);
- Power relay (38);
- Fuse (37);
- R.H. switch (25);
- Injector (6);
- Fall sensor (36) (SMR).

Table of Contents

Related product manuals