I.38
Part. N. 8000 H1344 (10-2009)
FRONT SUSPENSION
Front suspension (TE 310 USA/AUS - TE 450/510)
The front suspension unit is a KAYABA telescopic hydraulic fork with advanced axle;the diameter of the stem is 48 mm. The thermal
excursion of the wheel on the legs axis is 300 mm.
INSTRUCTIONS FOR USE OF Ø48 Upside-Down
(MODELS TE 310 USA/AUS - TE 450/510)
GENERAL
This fork is based on a multivalve damping system allows rebound and compres-
sion to be controlled and adjusted, it also has a spring for static load.
Each fork’s leg is provided with external adjusters for the compression and
the slider inner air bleed.
SPRING TABLE
The static load of the fork is determined by the spring: by changing either spring
features or pre-load sleeve length a different suspension behavior is obtained
without changing the hydraulic features. The following table describes the springs
available as spare parts.
COSTANT K (N/mm) CODE
4.4 8000 H2697
To Next Page
Loading...
