Husqvarna TE 310 - Connecting Rod Big End Side Clearance; Crankshaft

G.16 Part. N. 8000 H1344 (10-2009)
ENGINE OVERHAULING
Counter balance shaft (SMR)Crankshaft
Connetting rod big end side clearance
Crankshaft
Main joiurnals must not present any scores, or grooves; their threads, key seats
and slots have to be in good conditions.
STANDARD LIMITE DI SERVIZIO
0,300÷0,677 mm 0,75 mm
(0.012÷0.027 in) (0.03 in)
Crankshaft run-out
STANDARD WEAR LIMIT
0,05 mm
0.0019 in
0,05 mm
0,05 mm
0,05 mm
Al di sotto di 0,02 mm