Husqvarna TE 310 - Settings and Adjustments

D.2 Part. N. 8000 H1344 (10-2009)
SETTINGS AND ADJUSTMENTS
Adjustment of valves play ......................................... D.4
Adjustment of starter decompression device............ D.7
Throttle cable adjustment ................................. ....... D.8
Carburettor adjustment (TC, TXC) .... ...................... D.9
Idle adjustment (TC, TXC, SMR 450-R) ........... ....... D.9
Idle adjustment (TE, SMR) ............................... ....... D.9
Clutch discs replacement (TC, TE, TXC, SMR) ....... D.10
Adjustment of the control lever and check of
the clutch uid level ................................................. D.11
Adjustment of front brake control lever
and uid level control (TE, TC, TXC, SMR) .............. D.12
Rear brake pedal position adjustment ...................... D.13
Rear brake idle stroke adjustment ............................ D.14
Checking the rear brake uid level ........................... D.14
Checking the engine oil level .................................... D.15
Engine oil replacement and bag lters-cartridge lter
cleaning or replacement
...................................... D.16
Coolant level check .................................................. D.17
Replacement of coolant ............................................ D.17
Air lter check (TC-TXC) .......................................... D.18
Air lter cleaning (TC-TXC) ...................................... D.18
Air lter check (TE-SMR) .......................................... D.19
Air lter cleaning (TE-SMR) ...................................... D.20
Secondary transmission chain adjustment ............... D.21
Lubricating the transmission chain ........................... D.22
Adjusting the suspensions according to particular
track conditions......................................................... D.23
Adjusting the shock absorber ................................... D.24
Adjusting the shock absorber spring preload ........... D.25
Shock absorber hydraulic brake adjustment ........... D.26
Shock absorber springs ........................................... D.26
Adjusting the front fork (TE 310/EU, SMR)............... D.27
Adjusting the front fork
(TE 310 USA, TE 450-510, TC, TXC)....................... D.27
Front fork springs ..................................................... D.29
Steering bearings play adjustment ........................... D.31
Lock adjustment ....................................................... D.31
Handlebar position and height change
(TE, TC, TXC, SMR) ................................................. D.32
Checking the fuel hose ............................................. D.33
Replacing the mufer deadening material
(TC, TE, TXC) ........................................................... D.34
Replacing the mufer deadening material (SMR)..... D.35
Checking the exhaust system................................... D.36