EasyManua.ls Logo

Husqvarna TE 310 - Page 382

Husqvarna TE 310
420 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
S.4
Part. N. 8000 H1344 (10-2009)
FUEL INJECTION SYSTEM
This diagnosis software allows, besides the identication of the
malfunctions in progress, also the memorization of those that are
already occurred and that have been eliminated: for these last ones
it is possible to effect the cancellation, following the instructions of
the Operation Manual (page 29).
The ECU memorizes the number of the engine running hours (with
tolerance: + or - 1 hour) and, in the case of the rst equipment, the
identication numbers of the frame (VIN) and of the engine (Engine
No.) of the motorcycle. In case of replacement, the new ECU will
only show the number of engine running hours.
NOTES
The NEUTRAL green warning light comes on ONLY when the ignition key is in
ON position and the R.H. commutator is in RUN position.
The front-rear lights and the instrument display will come on when the ignition
key is in ON position.
The functions controlled by the L.H. commutator and the rear stop light can be
selected ONLY when the engine is running.
For the fuel pump and relays check, please see on pages S.5 and S.6.
H
Adjust item No. 1
so that the “Feedback
correction value” is
~ 100.0 %
F

Table of Contents

Related product manuals