W.2 Part. N. 8000 H1344 (10-2009)
SPECIFIC TOOLS
1- (1517 94702) Crankcase puller
2- (8000 A1580) Crankshaft guard
3- (8000 A1559) Flywheel extractor (TC-TXC)
3- (8000 B0144) Flywheel extractor (TE-SMR)
4- (8000 39521) Valves assembling and removing tool
5- (8A00 90662) Support for assy
**6- (8B00 A9634) Diagnosys kit (TE-SMR) (CD+Wiring)
*6A- (8B00 H0237) Control unit - Reprogramming kit (TE-SMR) (CD+Wiring)
8- (8000 A1625) Dial gauge holding tool
9- (8B00 H1387) Diagnosys CD
11- (8000 79015) Clutch hub retaining wrench
12- (8B00 H1388) Control unit - Reprogramming CD
13- (1519 84701) Spring hook
*Put the vehicle to “RACING CONFIG”, as described in section O (non type-approved vehicle), and use the kit to map the control unit.
**Use to detect the malfunctions
SPECIAL TOOLS
To Next Page
Loading...
