X.6 Part. N. 8000 H1344 (10-2009)
TORQUE WRENCH SETTINGS
NOTE: If not otherwise specied, standard tightening torques for the following thread (+/- 5%)
steel screws on plastic with metal spacer M4 2 Nm 0,2 Kgm 1.45 ft/lb
steel screws on brass, copper, aluminium M4 2 Nm 0,2 Kgm 1.45 ft/lb
steel screws on iron, steel M4 3 Nm 0,3 Kgm 2.2 ft/lb
steel screws on plastic with metal spacer M5 4 Nm 0,4 Kgm 3 ft/lb
steel screws on brass, copper, aluminium M5 4 Nm 0,4 Kgm 3 ft/lb
steel screws on iron, steel M5 6 Nm 0,6 Kgm 4.4 ft/lb
steel screws on plastic with metal spacer M6 6,5 Nm 0,65 Kgm 4.8 ft/lbb
steel screws on brass, copper, aluminium M6 6,5 Nm 0,65 Kgm 4.8 ft/lb
steel screws on iron, steel M6 10,5 Nm 1 Kgm 7.7 ft/lb
steel screws on brass, copper, aluminium M8 16 Nm 1,6 Kgm 11.8 ft/lb
steel screws on iron, steel M8 26 Nm 2,6 Kgm 19.1 ft/lb
steel screws on iron, steel M10 52 Nm 5,2 Kgm 38.3 ft/lb
steel screws on iron, steel M12 100 Nm 10 Kgm 73.8 ft/lb
steel screws on iron, steel M14 145 Nm 14,5 Kgm 107 ft/lb
To Next Page
Loading...
